Mitsubishi Electric MELSEC iQ-R Series User Manual page 138

Precautions
• For software versions for which default gateway can be set, refer to the following:
(Page 299 Added and Changed Functions)
• CH2 cannot be set for RD55UP06-V-BZ11, RD55UP06-V-BZ13, and RD55UP06-V-BZ15 because they have only one
Ethernet port.
• If the network settings are duplicated between channels that are different from a channel to be set, such as in the following
cases, an IP address cannot be changed. The IP address before change is retained.
Series
MELSEC iQ-R series
MELSEC-Q series
• If changing an IP address fails, an event log will be registered in the event history. Check the event history and
troubleshooting by symptoms and then take corrective actions. (Page 271 Troubleshooting by Symptom)
7 BASIC FUNCTIONS
136
7.13 IP Address Setting
Network setting
• When an IP address set in GX Works3 and an IP address set from a setting tool are duplicated
• When an IP address set in GX Works3 and the network segment of an IP address set from a setting tool are
duplicated
• When an IP address being set and an IP address set from a setting tool are duplicated
• When an IP address being set and the network segment of an IP address set from a setting tool are duplicated