4
WIRING
This section explains the wiring of a SECS/GEM communication software pre-installed model module.
Ethernet cable
For Ethernet, a cable that complies with the IEEE802.3 100BASE-TX/10BASE-T standards can be used.
For the specifications of cables that can be used, refer to the following:
MELSEC iQ-R C Intelligent Function Module User's Manual (Startup)
MELSEC-Q C Controller Module User's Manual
C Controller Module User's Manual (Hardware Design, Function Explanation)
RS-232 cable
For the specifications of RS-232 cables that can be used, refer to the following:
MELSEC-Q C Controller Module User's Manual
C Controller Module User's Manual (Hardware Design, Function Explanation)
4 WIRING
26