Device Find/Replace - Mitsubishi Electric MELSEC iQ-R Series User Manual

7.16

Device Find/Replace

Series
MELSEC-Q series
MELSEC iQ-R series
This section explains the find and replace method for devices used in the project.
The following table shows the ranges of devices that can be found/replaced.
Device Range of devices that can be found/replaced
MELSEC-Q series
Non-GEM version
B B0 to BFFFF
D D0 to D32767
M M0 to M2147483647
R R0 to R32767
W W0 to W7FFF
X X0 to X7FFF
Y Y0 to Y7FFF
ZR ZR0 to ZR2147483647
*1 When using Ver.1.27D or earlier, the ranges of devices that can be found/replaced are the same as those of non-GEM version of
MELSEC-Q series.
*2 When using Ver.1.29F or earlier, the ranges of devices that can be found/replaced are the same as those of non-GEM version of
MELSEC-Q series.
Window
[Setting]  [Device Find/Replace]
7 BASIC FUNCTIONS
150
7.16 Device Find/Replace
SECS/GEM communication software
Non-GEM version


GEM version, GEM
advanced version
B0 to BFFFF
D0 to D32767
M0 to M2147483647
R0 to R32767
W0 to W7FFF
X0 to X7FFF
Y0 to Y7FFF
ZR0 to ZR2147483647
GEM version


MELSEC iQ-R series
Non-GEM version
*1
(Ver.1.28E or later)
B0 to B7FFFFFFF
D0 to D2147483647
M0 to M2147483647
R0 to R2147483647
W0 to W7FFFFFFF
X0 to X7FFF
Y0 to Y7FFF
ZR0 to ZR2147483647
GEM advanced version


GEM version, GEM
*2
advanced version
B0 to B7FFF
D0 to D2147483647
M0 to M2147483647
R0 to R32767
W0 to W7FFFFFFF
X0 to X7FFF
Y0 to Y7FFF
ZR0 to ZR2147483647