Spool Common Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

Spool common settings

Series
MELSEC-Q series
MELSEC iQ-R series
Common
Window
[GEM Function]  [Common Spool]  [Common]
Displayed items
Item
System Default Settings
State Notification
Register Assignment
8 GEM COMPLIANT FUNCTIONS
200
8.8 Spool Function (GEM / GEM advanced version)
SECS/GEM communication software
Non-GEM version


Description
Maximum No. of Spool Specify the maximum number of spool data items to be sent at once from the equipment for an S6F23
Transmission (spooled data request) from the host.
To have no limit on the maximum number, set 0.
The maximum number is reflected in the equipment variable MaxSpoolTransmit and can be changed by
an S2F15 (new equipment variable change) from the host.
Maximum No. Of Spool Set the maximum number of messages to be spooled at the equipment.
Items This setting is reflected in the equipment variable MaxSpoolCount.
Overwrite Spool Select the operation method when the maximum number of spool items is exceeded.
• "0: Not performed": discard the overflow.
• "1: Perform": overwrite spooled messages.
This setting is reflected in the equipment variable OverWriteSpool.
Enable Spooling Configure whether to use the spooling function.
This setting is reflected in the equipment variable EnableSpooling.
Spooling State This register enables the SECS/GEM communication software to notify the programmable controller
Notification CPU of spooling state.
This setting is reflected in the state variable SpoollingState.
For more details of values, refer to the following:
Page 216 Variables defined by default
GEM version


GEM advanced version

