Huawei FusionModule500 V100R021C10 User Manual page 234

FusionModule500 Smart Mini Data Center
User Manual
2.
3.
4.
Step 4 Observe the hard disk indicator to check whether the hard disk works properly.
----End
Issue 01 (2020-11-30)
Insert the hard disk tray back at 45 degrees with the opening of its locking
buckle facing downwards, hold the screw in the red-framed part to lower the
hard disk tray until it is level, and fasten the black screws on the left and right
sides and the white screw on the top.
Figure 6-20 Fastening the screw on the panel and the screws on the hard disk
tray
Connect data and power cables to hard disks. Connect hard disk cable ports
P0–P3 to hard disks on the lower-layer hard disk tray and ports P4–P7 to hard
disks on the upper-layer.
Figure 6-21 Connecting data and power cables to hard disks
Close the chassis cover, and use a PH2 screwdriver to fasten the rear screws.
Figure 6-22 Closing the chassis cover
Copyright © Huawei Technologies Co., Ltd.
6 O&M
225