Huawei FusionModule500 V100R021C10 User Manual page 127

FusionModule500 Smart Mini Data Center
User Manual
● In ECC800 V100R002C10 and earlier versions, the default IP address of port
● The WAN_1 port IP address cannot be set to an IP address in any of the
● IP addresses for the WAN_1 and WAN_2 ports should not be set in the same
● In some customized scenarios, the default IP address for the WAN_2 port is
● WAN ports support the Internet access and LAN ports support the intranet
Step 2 Configure the PC IP address and the WAN_1 IP address in the same network
segment.
If the WAN_1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and
default gateway is 192.168.8.1, set the PC IP address to 192.168.8.12, subnet mask
to 255.255.255.0, and default gateway to 192.168.8.1.
Step 3 Set LAN parameters.
1.
2.
3.
4.
5.
Issue 01 (2020-11-30)
NO TICE
WAN_1 is 192.168.1.10.
following network segments: 192.168.0.x, 192.168.245.x, 192.168.246.x and
192.168.248.x.
network segment.
192.168.248.10. The default value prevails.
access. Connect the network port of the PC to the WAN or LAN port of the
ECC800-Pro based on the access network.
NO TE
● If the ECC800-Pro connects to a LAN and a proxy server has been selected, perform
3.3 and Step 3.4.
● If the ECC800-Pro connects to the Internet, and the PC in a LAN accesses the Internet
over a proxy server, do not perform
access the ECC800-Pro.
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
(Optional) Click the Connections tab and select LAN settings.
(Optional) On Proxy server, clear Use a proxy server for your LAN.
Click OK.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Step 3.3 and Step 3.4. Otherwise, you will fail to
Step
118