FusionModule500 Smart Mini Data Center
User Manual
5.
6.
Step 2 Install the device.
Issue 01 (2020-11-30)
Figure 4-39 Fastening the screw on the panel and the screws on the hard disk
tray
Connect data and power cables to hard disks. Connect hard disk cable ports
P0–P3 to hard disks on the lower-layer hard disk tray and ports P4–P7 to hard
disks on the upper-layer, as shown in the lower left figure.
Figure 4-40 Connecting data and power cables to hard disks
Close the chassis cover, and use a PH2 screwdriver to fasten the rear screws.
Figure 4-41 Closing the chassis cover
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
91