FusionModule500 Smart Mini Data Center
User Manual
●
Procedure
Step 1 Connect power cables between lithium batteries and the UPS.
1.
2.
3.
Issue 01 (2020-11-30)
The actual number of batteries depends on the onsite configuration.
Connect the positive battery terminal to the RTN+ port on the busbar and the
negative battery terminal to the –48 V port on the busbar.
Figure 4-59 Connecting cables between lithium batteries and busbars
Connect cables between the busbars and the PDU.
Connect cables between the PDU and the UPS.
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
103