Huawei FusionModule500 V100R021C10 User Manual page 113

FusionModule500 Smart Mini Data Center
User Manual
Step 2 Connect communications cables between lithium batteries and the UPS.
1.
2.
Issue 01 (2020-11-30)
Figure 4-60 Connecting cables between the busbars, PDU, and UPS
After lithium batteries are connected in parallel, connect a signal cable to the
BMS port of the UPS.
A build-out resistor needs to be installed at the COM-OUT port of the lithium
battery at the end.
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
104