Siemens SINUMERIK 840D Description Of Functions page 4

3ls
SINUMERIK
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A . . . . . New documentation.
B . . . . . Unrevised reprint with new Order No.
C . . . . . Revised edition with new status.
If factual changes have been made on the page in relation to the same software
version, this indicated by a new edition coding in the header on that page.
Edition
02.99
08.99
04.00
This manual is included in the documentation on CD-ROM (DOCONCD)
Edition
04.00
Trademarks
SIMATICr, SIMATIC HMIr, SIMATIC NETr, SIROTECr, SINUMERIKr und SIMODRIVEr sind Marken von
Siemens. Other names in this publication might be trademarks whose use by a third party for his own
purposes may violate the rights of the registered holder.
Further information is available on the Internet under:
http://www.ad.siemens.de/sinumerik
This publication was produced with Interleaf V 7.0.
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority. Offenders
will be liable for damages. All rights, including created by patent grant
or registration of a utility model or design, are reserved.

Siemens AG 2000. All rights reserved
Order No. 6SN1197–0AB60–0BP1
Printed in the Federal Republic of Germany

Documentation
Order No.
6SN1197–0AB60–0BP0
6SN1197–0AB60–0BP1
6SN1197–0AB60–0BP2
Order No.
6FC5 298–5CA00–0BG2
Remarks
A
C
C
Remarks
Other functions not described in this documentation might be
executable in the control. However, no claim can be made regarding
the availability of these functions when the equipment is first supplied
or for service cases.
We have checked that the contents of this document correspond to
the hardware and software described. Nonetheless, differences might
exist and therefore we cannot guarantee that they are completely
identical. The information contained in this document is, however,
reviewed regularly and any necessary changes will be included in the
next edition. We welcome suggestions for improvement.
Subject to changes without prior notice.
Siemens Aktiengesellschaft