Areas Of Responsibility Of Siemens And Bosch - Siemens SINUMERIK 840D Description Of Functions

Service
8.1

Areas of responsibility of Siemens and Bosch

 Siemens AG 2000. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
The areas of responsibility with respect to Sales and Servicing as shown in
Table 8-1 below have been agreed between Siemens and Bosch.
Table 8-1 Areas of responsibility for sales and servicing
Siemens AG
"Electrical" equipment/
configuring
HMI/MMC
NC/PLC
NE (mains supply equipment)
Closed-loop control modules
Power sections
Motors
Cabling
Hydraulic drive module
Hydr. system cabling (see Sect. 7.3.2)
Note
Neither company bears sole responsibility for the overall installation.
Siemens AG and Robert Bosch GmbH are deemed to bear responsibility only if
they are the system supplier of the components listed in Table 8-1 or have certi-
fied explicit system compatibility for components supplied by other manufactur-
ers.
Robert Bosch GmbH
"Hydraulic" equipment/
configuring
Valves
Hydraulic equipment
Power units
Cylinders
Pipework
Pressure sensors
Encoder sensors
8
8-231