Siemens SINUMERIK 840D Description Of Functions page 200

6 Hydraulics Diagnostics
Reaction
Remedy
To continue
program
310 704
Explanation
Reaction
Remedy
To continue
program
310 705
Explanation
Reaction
Remedy
To continue
program
6-200
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
NC not ready
Channel not ready.
NC Stop in response to alarm.
NC Start disable.
The NC switches to follow-up mode.
Alarm is displayed.
Interface signals are set.
See drive functions "FB / DB1"
MD1002
Switch control system OFF and ON again.
Axis %1, drive %2 velocity controller clock cycle axially unequal
%1 = NC axis number
%2 = drive number
On 2-axis modules, the velocity controller clock cycle set in MD 5001:
SPEEDCTRL_CYCLE_TIME must be identical for both axes.
NC not ready
Channel not ready.
NC Stop in response to alarm.
NC Start disable.
The NC switches to follow-up mode.
Alarm is displayed.
Interface signals are set.
Set velocity controller clock cycle in MD 5001: SPEEDCTRL_CYCLE_TIME to
an identical value for both axes.
Switch control system OFF and ON again.
Axis %1, drive %2 monitoring cycle axially unequal
%1 = NC axis number
%2 = drive number
On 2-axis modules, the monitoring cycle set in MD 5002:
MONITOR_CYCLE_TIME (monitoring cycle) must be identical for both axes.
NC not ready
Channel not ready.
NC Stop in response to alarm.
NC Start disable.
The NC switches to follow-up mode.
Alarm is displayed.
Interface signals are set.
Set MD 5002: MONITOR_CYCLE_TIME (monitoring cycle) to an identical value
for both axes.
Switch control system OFF and ON again.
 Siemens AG 2000. All rights reserved
02.99