Siemens SINUMERIK 840D Description Of Functions page 269

02.99
Appendix A to EC Declaration of Conformity No. E002 V 25/02/99
A16: Typical plant configuration
SINUMERIK 840D/SIMODRIVE 611D with closed-loop
hydraulics module (HLA)
Mains terminal
*) with I/RF module
**)with UE module
S
All components which are designated in the Ordering Information as approved for operation in a
combined SINUMERIK 840D / SIMODRIVE 611D installation comply with Directive 89/336/EEC
when operated in an installation of this type.
S
For compliance with standards, see Appendix C
Note:
The plant configuration sketch illustrates only the basic measures to be implemented in a typical plant
configuration to ensure compliance with Directive 89/336/EEC.
In addition, especially in cases where the plant configuration deviates from this
typical model, the installation guidelines for EMC plant design in the product documentation and
the EMC installation guidelines for SINUMERIK, SIROTEC and SIMODRIVE (order no.:
6FC5297-0AD30-0BP0) must be noted and implemented.
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
Metal cabinet
Operator panel
Machine
control panel
611D
Fil-
840D
with
ter
HLD
*)
**) *)
Fil-
ter
Throttle
E EC Declaration of Conformity
Actual pressure
Actual position
Setpoint
Hydraulic valve control
E-269