Removing The Process Tray (Rear); Preparation; Procedure - Canon Booklet Finisher-D1 Service Manual

4
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Process Tray (Rear) > Procedure

Removing the Process Tray (Rear)

■ Preparation

1) Remove the Stack Wall (Lower).(Refer to page 4-29)
2) Remove the Stack Wall (Upper).(Refer to page 4-27)
3) Remove the Neat Stack Unit (Lower).(Refer to page 4-59)
4) Remove the Process Tray Unit.(Refer to page 4-62)

■ Procedure

1) Remove the Process Tray Alignment Plate (Rear) [1].
• 1 Screw [2]
• 1 Claw [3]
4 Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Process Tray (Rear) > Procedure
2) Remove the Process Tray (Rear) [1].
• 2 Screws [2]
• 1 Protrusion [3]
[1]
[3]
[2]
F-4-163
x2
[1]
[2]
[3]
4-69
[2]
F-4-164
4-69