Canon Booklet Finisher-D1 Service Manual page 348

<If connected to Paper Folding unit>
x2
<If connected to Document Insertion Unit>
x2
7
Installation > Installation Procedure > Connecting Cable
Wire Saddles
ARCNET Cable
F-7-69
Wire Saddles
ARCNET Cable
F-7-70
7 Installation > Installation Procedure > Connecting Cable
7) Connect the power cable to the Finisher.
CAUTION:
Make sure that the power cord is fully connected to the outlet.
If the connection is not right, an accident causing the smoke or fire may occur.
CAUTION: Note for Europe, Asia/Oceania Regions
Use the correct power cord to mach the location/area of installation.
make sure not leave unused power cord at the site.
8) Connect the Power Plug of the Finisher to the outlet.
9) Turn ON the power in the order of the Finisher, then the Host Machine.
7-26
Power Cable
F-7-71
7-26