Canon Booklet Finisher-D1 Service Manual page 334

4) Fit the positioning pin.
• 2 Screws (RS tightening; M4x10)
Positioning
Pin
x2
Positioning Pin
Screw
5) Install the Delivery Guide Up to the Host Machine.
• 3 Hooks
• 1 Screw (P tightening; M4x12)
6) Install the Delivery Guide Down to the Host Machine.
• 2 Hooks
• 1 Screw (P tightening; M4x12)
Hook
x2
Hook
7
Installation > Installation Procedure > Connecting with the Host Machine
F-7-25
Hook
Delivery Guide Up
Hook
Delivery Guide Down
F-7-26
7 Installation > Installation Procedure > Connecting with the Host Machine
7) Lock the Latch Plate (Front). Then, fit the positioning pin on the machine side to the
Finisher's positioning hole.Connect the Finisher with the machine.
<Front side>
Latch Plate(Front)
<Rear side>
7-12
F-7-27
Positioning Pin Hole
F-7-28
7-12