4
Parts Replacement and Cleaning Procedure > Main Units > Removing the Processing Tray Unit
Removing the Processing Tray Unit
2) Draw out the saddle stitcher unit.
1) Remove the stapler
drive unit.
(Refer to page 4-28)
3) Disconnect the 5 connectors.
x5
4
Parts Replacement and Cleaning Procedure > Main Units > Removing the Processing Tray Unit
F-4-58
F-4-58
4) Remove the 3 screws and take out the bottom plate.
x3
F-4-59
F-4-59
4-30
F-4-60
F-4-60
4-30