Canon Booklet Finisher-D1 Service Manual page 99

4
Parts Replacing and Cleaning > Stacking Assembly > Removing the Tray B Unit > Procedure
3) Remove the Tray B Unit [1].
CAUTION:
Be sure to avoid contact with the Upper Cover [1] when removing the unit.
[1]
4 Parts Replacing and Cleaning > Stacking Assembly > Removing the Tray B Unit > Procedure
CAUTION:
When installing the Tray A/B Unit, be careful not to get the cables of the Tray A Unit and
Tray B Unit tangled.
F-4-63
CAUTION:
The Tray B [1] must be below the Tray B Paper Sensor [2] at power-on. Otherwise, it
can cause an error at position detection of the Tray B.
[1]
F-4-64
[1]
4-36
F-4-65
[2]
F-4-66
4-36