Removing The Fold Roller; Preparation; Procedure - Canon Booklet Finisher-D1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Fold Roller > Procedure

Removing the Fold Roller

■ Preparation

1) Open the Front Cover.
2) Pull out the Saddle Unit. (service position)(Refer to page 4-99)
3) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
4) Remove the Press Unit.(Refer to page 4-102)

■ Procedure

1) Hold the grip [1], and open the Feed Roller Guide [2] to remove it.
• 1 Screw [3]
[3]
[2]
[1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Fold Roller > Procedure
F-4-269
2) Remove the Unit Fixation Base (Front) [1].
• 2 Screws [2]
[2]
4-108
[1]
F-4-270
4-108