Canon Booklet Finisher-D1 Service Manual page 246

5
Adjustment > Auxiliary Adjustment > Adjusting Position of Feed Belt > Procedure
[3]
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
[1] [2]
4) Press switch SW385 [1] to complete adjustment of the feed belt.
"0" indication on the LED means normal completion of the adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+)
5) If the LED indication is anything other than "0" meaning the adjustment failure, execute the
adjustment again.
5 Adjustment > Auxiliary Adjustment > Adjusting Position of Feed Belt > Procedure
[4]
[5]
[2]
ENTER
[1]
F-5-160
F-5-159
5-70
5-70