Removing The Stack Wall (Lower); Preparation; Procedure - Canon Booklet Finisher-D1 Service Manual

4
Parts Replacing and Cleaning > Stacking Assembly > Removing the Stack Wall (Lower) > Procedure

Removing the Stack Wall (Lower)

■ Preparation

1) Open the Front Cover.

■ Procedure

CAUTION:
Be sure to avoid scars and dents on the Stack Rail [1]. Having scars or dents on the
Stack Rail can affect stackability. If soiling is attached, be sure to clean it with alcohol.
4 Parts Replacing and Cleaning > Stacking Assembly > Removing the Stack Wall (Lower) > Procedure
[1]
[1]
F-4-44
1) Remove the Tray B Upper Limit Stopper [1].
• 1 Screw [2]
[1]
[2]
2) Lift the Tray B [1] until it hits the [A] part of the Neat Stack Unit (Lower) Cover [2].
[A]
F-4-45
[2]
[1]
F-4-46
4-29
4-29