Mitsubishi Electric MELSEC iQ-R Series User Manual page 555

Error Error Error name
code (System/
(Hexad axis/axes
ecimal) group)
341DH System Out of Input Absolute
Coordinate Range
341EH System Out of Output Absolute
Coordinate Range
341FH System Out of Composite Mode
Range
3421H System Out of Input Offset
Range
3422H System Out of Output Offset
Range
3423H System Out of Input Coefficient
Range
3424H System Out of Output
Coefficient Range
342DH System SD Memory Card Use
Disabled
342EH System SD Memory Card Write
Disabled
342FH System SD Memory Card
Unload
3430H System SD Memory Card Error
3433H System Out of Request ID
Setting Value Range
3434H System Request Data Setting
Value Incorrect
3435H System Out of Request Data
Setting Value Range
3436H System Out of Response Data
Length Setting Value
Range
Error detail and cause Detection
timing (At
start/
during
control
The value is out of range for When
InputAbsolute. executing FB
The value is out of range for When
OutputAbsolute. executing FB
The value is out of range for When
SynthesizingMode. executing FB
The value is out of range for When
InputOffset. executing FB
The value is out of range for When
OutputOffset. executing FB
The value is out of range for When
InputScaling. executing FB
The value is out of range for When
OutputScaling. executing FB
SD memory card is not mounted. When
Or it was wrote to SD memory accessing SD
card when memory card
"System.Md.SdcForcedDisable
(SD memory card forced Stop
using status flag)" is TRUE.
It was wrote to SD memory card When
when SD memory card is accessing SD
"System.Md.SdcProtect (SD memory card
memory card protect flag)" is
TRUE.
The memory card was removed When
without SD memory card being removing SD
disabled. memory card
SD memory card is corrupted When
accessing SD
memory card
The value is out of range for When
Request ID. executing
dedicated
instruction
Incorrect request data is set. When
executing
dedicated
instruction
The value is out of range for When
request data length. executing
dedicated
instruction
The value is out of range for When
response data length. executing
dedicated
instruction
Operation at Remedy
error
occurrence
Not execute FB. Set the value within the
range.
Not execute FB. Set the value within the
range.
Not execute FB. Set the value within the
range.
Not execute FB. Set the value within the
range.
Not execute FB. Set the value within the
range.
Not execute FB. Set the value within the
range.
Not execute FB. Set the value within the
range.
The access is not • Format SD Memory
allowed. Card.
• Remount SD Memory
Card.
• Replace SD Memory
Card.
• Disable the write-
protected switch and
remount.
The access is not Change SD Memory
allowed. Card protect flag to
FALSE.

Remove SD memory
card after SD memory
card being disabled.
The access is not • Format SD Memory
allowed. Card.
• Remount SD Memory
Card.
• Replace SD Memory
Card.
Dedicated instruction is Check setting data.
completed with the error.
Dedicated instruction is Check setting data.
completed with the error.
Dedicated instruction is Check setting data.
completed with the error.
Dedicated instruction is Check setting data.
completed with the error.
22 TROUBLESHOOTING
22.5 List of Error Codes
22
553