Unpacking Carton - Huawei BTS3606 Installation Manual

Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Figure 1-3 Removing all left wooden boards
5) Unpack other cases in the same way.
When handling the cabinet, hold on the solid places such as the upper cable rack or
bone frame. Do not use too much force on places with poor rigidity, such as cable
supports, cable fixing beams, to avoid any damage to the cabinet or any accident.
Remove the lining board of the rack at the place where the cabinet is to be installed.
Otherwise, boards and signal cables may be damaged in the conveyance.

1.4.3 Unpacking Carton

Cartons are usually used to pack cables, circuit boards and terminal devices. During
transportation, these circuit boards are usually put in anti-static bags. When unpacking
the circuit boards, you need to take anti-static measures to avoid any damage to these
boards.
Meanwhile, pay attention to the temperature and humidity of the environment. To keep
the anti-static bag dry, you need to put desiccant in the bags so that it can absorb
moisture in the bags. After transporting the equipment to a place with higher
temperature and humidity, do not unpack it immediately until 30 minutes later.
Otherwise, moisture will condense on the surface of the equipment, causing damage to
it.
To open a carton, do as follows:
1) Check the types and quantity of boards inside the carton according to labels.
Huawei Technologies Proprietary
1-8
Chapter 1 Installation Preparations