Installing Other Functional Modules; Installing Equipment In Extension Cabinet - Huawei BTS3606 Installation Manual

Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station

3.7 Installing Other Functional Modules

The installation procedure of other functional modules such as fan box is the same as
that of RF modules. For details, see section 3.5.2 "Installation Procedure".
Note:
Normally, the fan box is installed upon delivery. No field installation of the fan box is
required.

3.8 Installing Equipment in Extension Cabinet

When BTS3606 cabinets are combined, the slots for the BCKM and CCPM/CECM in
the extension cabinet are configured with the TMCM and LECM. To install the TMCM
and LECM, proceed as follows:
Insert the TMCM into the slot of the BCKM in the upper half part of the combined
subrack.
Insert LECMs into the slots of the CCPM/CECM in the upper half part of the
combined subrack from right to left. A maximum of three LECMs can be
configured.
For instructions on the installation of modules and boards, see sections 3.1 to 3.7 .
Chapter 3 Installing Cabinet and Cabinet Equipment
Huawei Technologies Proprietary
3-9