Table of Contents
Advertisement
Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
(1) 25-pin connector
Figure 4-20 Structure of the EAC data cable
4.7.3 Connecting Shared Grounding Cable
To connect the shared grounding cable, proceed as follows:
1)
Connect one end of the cable to the working ground of the EAC.
2)
Connect the other end of the cable to the PE grounding copper bar on the top of
the cabinet, as shown in Figure 4-21.
In this way, the EAC can share the same grounding with the BTS equipment.
(1) PE grounding bar
Figure 4-21 Top sectional view of the cabinet
4.7.4 Setting User-Defined Extended Port
You can define the EAC extended port and query the setting.
(2) #4-40 screw
Huawei Technologies Proprietary
(3) Label
4-26
Chapter 4 Installing Cables
(4) 9-pin connector
Advertisement
Table of Contents
