Table of Contents
Advertisement
Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
(1) U-bar fixing hole
Figure 2-17 Drilling holes on U-bar support
2)
Remove all burrs and sharp edges.
3)
Paint the whole support with rustproof coat and top-coat. The color of the coat
must be the same as or similar to that of the cabinet.
III. Fixing the U-bar Support
To fix the U-bar support, proceed as follows:
1)
Install expansion bolts by following the instructions in section 2.4.2 II. "Drilling
Holes and Installing Expansion Bolts".
2)
Place the U-bar support onto the installation position aligning the installation
holes with U-bar fixing holes.
3)
Fasten the nuts one by one, as shown in Figure 2-18.
(2) Installation hole of the base
Huawei Technologies Proprietary
2-20
Chapter 2 Installing Cabinet Assemblies
Advertisement
Table of Contents
