Table of Contents
Advertisement
Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Chapter 6 Checking Cabinet Installation
Cabinet installation check is to review the indoor installation described in the previous
chapters.
The following items must be checked:
Cabinet equipment
Cable distribution
Environment of the equipment room
Power-on operation
Others
6.1 Checking Cabinet Equipment
Check the following items concerning the installation of cabinet equipment.
Table 6-1 Check items for cabinet equipment installation
Item
1
2
3
4
5
6
7
8
9
10
11
The power cables, grounding cables, trunks, and RF cables are intact and
there is no tie-in on them.
The RF cable connectors are installed in position. Poor connection will result
in abnormal voltage standing wave ratio and affect the normal operation of
the system.
The rack and base/support are firmly connected. The rack is stable after
installation.
The connectors of the trunks are intact. They are made according to
specifications and connected securely.
The cables are distributed in a way to facilitate maintenance and expansion.
Insulating materials are used to insulate the cabinet from the ground and the
wall.
All the cabinet doors at the aisle are installed and aligned. The error is less
than 5 mm (0.2 in.).
The space between adjacent bases is equal to or less than 3 mm (0.12 in.).
The vertical deviation of the cabinet is less than 3 mm (0.12 in.).
The cables from the combiner, the divider, and CDDU to the top of the
cabinet run through the space on both sides of the cabinet.
Rigid cables are not cross-connected but properly stretched. They are bent
neatly and orderly with certain margin at the bending parts
Huawei Technologies Proprietary
Chapter 6 Checking Cabinet Installation
Requirement
6-1
Advertisement
Table of Contents
