Table of Contents
Advertisement
Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
(1) Power cable
(3) Naked crimping connector
Figure 4-18 Structure of an EAC power cable
Note:
The letters A, B, C as shown in Figure 4-18 are not cable labels. They are used for
the convenience of installation description.
To connect power cables, proceed as follows:
1)
Connect the OT terminal of cable C (yellow green) as shown in Figure 4-18 to
the grounding screw of the PE grounding bar as shown in Figure 4-19
Huawei Technologies Proprietary
4-24
Chapter 4 Installing Cables
(2) 2P horizontal connector base
(4) Heat-shrinkable tube
Advertisement
Table of Contents
