Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Caution:
Watch out for the sharp edges on the RF fan panel during the installation of RF
cables lest it hurt your fingers.
When installing the RF cable, connect unused connectors to matching load and
secure them.
The following describes the connections of the RF cables in various typical
configurations.
I. O(1) Configuration
The O(1) refers to an omni cell with one carrier. Figure 4-1 shows RF cable
connections, indicated by blue lines.
D1
CHPA
Figure 4-1 O(1) configuration
II. O(2) Configuration
The O(2) refers to an omni cell with two carriers. Figure 4-2 shows RF cable
connections, indicated by blue lines.
Sector A
CDDU
RX1
TX1
RX2
TX2
D2
D3
CTRM
DRI
PAout
MRI
MRO
TX2
PAin
TX1
D4
Huawei Technologies Proprietary
Sector B
4-5
Chapter 4 Installing Cables
Sector C