Table of Contents
Advertisement
Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
8)
Turn the two ejector levers towards the middle of the panel to fix the board, as
shown in Figure 3-7.
Figure 3-7 Installing a board (2)
9)
Tighten the screws clockwise on the front panel, as shown in Figure 3-8.
Figure 3-8 Installing a board (3)
3.5 Installing Modules in RF Subrack
RF modules include CTRM, CHPA, CMTR, CMPA, and CDDU. This section introduces
the installation of modules in the RF subrack and precautions.
3.5.1 Precautions
The transmit and receive performance of the BTS may degrade if the CTRM/CMTR,
CDDU, or other RF modules are fastened before being inserted in position.
3.5.2 Installation Procedure
To install a module in the RF subrack, proceed as follows:
1)
Make sure the subrack is clean.
Chapter 3 Installing Cabinet and Cabinet Equipment
Huawei Technologies Proprietary
3-7
Advertisement
Table of Contents
