Other Cables; Checking Room Environment - Huawei BTS3606 Installation Manual

Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Item
23
24
25

6.2.2 Other Cables

Check the following items concerning the installation of other cables.
Table 6-3 Check items for other cables installation
Item
1
2
3
4
5
6

6.3 Checking Room Environment

Check the following items concerning the environment of the equipment room.
Table 6-4 Equipment room environment check items
Item
1
2
The naked part and lugs of the power cable and the grounding cable are
wrapped with protection tube or insulating tape. The copper-core wires are
not exposed.
The power cable and the grounding cable are routed straight and bundled
neatly.
The power cables and grounding cables provided by Huawei include -48 V
power cables (blue cables), GND (BGND) cables (black or red cables), and
PGND cables (yellow-green or yellow cables).
The GPS/GLONASS clock RF cables are correctly connected to the front
panel of the BCKM.
The RF cables on the front panel of the CDDU are correctly connected.
The optical fibers between the CCPM and the soft BTS are correctly
connected.
The cables and the connectors of the optical fibers are intact and clean. The
optical fibers are direct. The labels are correct and stuck properly.
The trunk and the socket are connected appropriately.
When BTS3606 cabinets are combined, RS485 serial port cables, optical
fibers, and GPS RF cables are connected properly. Cable connections
comply with the specifications.
The voltage and capacity of the DC power supply meet the long-term
operation requirements of the equipment.
The Power Distribution Frame (PDF) and the output current-limiting
protection of the primary power supply meet the requirements of the
equipment.
Huawei Technologies Proprietary
Chapter 6 Checking Cabinet Installation
Requirement
Requirement
Requirement
6-5