Table of Contents
Advertisement
Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Start
Position the
cabinet
Install expansion
bolts
Fix the lower
support
Level the
lower support
Conduct
insulation test
End
Figure 2-6 Installation flowchart of the lower support on cement floor
2.4.2 Installation Procedure
To install lower supports on the cement floor, proceed as follows:
I. Positioning the Cabinet
To position the cabinet, proceed as follows:
1)
Determine the installation position of the cabinet according to the positioning
dimensions specified in the project design and construction blueprint.
2)
Place the lower support on the floor according to the cabinet layout.
3)
Mark the positions of four connecting holes of the cabinet (Each cabinet has four
connecting holes).
OK
Check the
insulating parts
Failed
OK
Huawei Technologies Proprietary
Chapter 2 Installing Cabinet Assemblies
Damaged
or missing
Repair/replace
the parts
Repeat
insulation test
2-7
Advertisement
Table of Contents
