846] Wip Information - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 846] WIP INFORMATION

2 4 6 B
This MMC sets up the WIP-5000M wireless terminal information.
No Parameter
00 REGISTERED
01 LOCATED
02 PHONE TYPE
03 WLI NUMBER
04 WBS NUMBER
05 IP OFFSET
06 IP ADDRESS
07 MAC ADDR
08 USER ID
09 PASSWORD
10 INSERT DGT
11 HO THRSH
12 HO DELTA
13 HO SCAN
2-386
Description
Shows if the terminal is registered.
Shows if the terminal is connected to the system.
Shows the type of the terminal.
Number of WLI connected to the WBS24 servic-
ing the terminal
(This parameter is not shown in OfficeServ 7100/
OfficeServ 7030)
Number of WBS24 servicing the terminal
Location of IP pool of the terminal IP
Terminal IP address
Terminal MAC address
User ID per terminal
Password of terminal user
If five or more numbers are entered into the WIP
terminal, this INSERT DGT is prefixed to the
numbers, provided the entered numbers do not
start with a C.O. number, C.O. group number,
LCR, network LCR, or function code.
Handover Thresh Hold Value (-99~0)
Thresh Hold is a signal level which makes WLAN
phone start scanning for handover.
If this signal level is under the registered Thresh
Hold, WLAN phone will start scanning.
This parameter has a minus value but system
only displays the value without minus. (So the
default value of Thresh Hold will be shown as
70 not -70.)
Handover Delata Value (0~99)
DELTA means the signal level difference be-
tween AP which includes WLAN phone and an-
other AP.
If this signal level difference is over the regis-
tered DELTA, WLAN phone will start to hand-
over.
In this case the signal level of WLAN phone
should be under the Thresh Hold.
Handover Scan Time Value (0~99)
SCAN Time is a period of scanning for WLAN
Handover.
Default
NO
DETACH
NONE
-
-
-
0.0.0.0
0000 0000 0000
PHONE NUM
0000
-
70
05
01
Samsung Business Communications