207] Assign Vm/Aa Port - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 207] ASSIGN VM/AA PORT

6 4 B
Enables SLI ports to be designated as NORMAL or VM/AA. VM/AA ports receive digits
designated in MMC 726(VM/AA Options) and also receive a true disconnect signal on
completion of a call. Only SLI cards, not keyset daughter-boards, support disconnect signal.
Do not make VM/AA ports data; this will return them to a single line port and stop voice
mail integration. VM/AA ports have the equivalent of data protect written in the program
and are protected against tones.
When using the MMC [207]
This MMC is not used to assign voice mail card ports. Voice mail card ports are
assigned as voice mail ports automatically when the system detects an SVM-400
or SVMi-20 card. In case of OfficeServ 7100, this MMC do not be shown. Office-
Serv 7100 supports only embedded VM
D EFAULT DATA
3 8 8 B
NORMAL PORT
A CTION
3 8 9 B
1) Press Transfer button and enter 207.
Display shows:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
3) Dial 1 or 0 to select port type.
(1:VMAA, 0:NORMAL)
OR
Press Volume button to select type and press
Right Soft button.
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to
next MMC.
R ELATED ITEMS
3 9 0 B
MMC 726
2-52
VM/AA OPTIONS
DISPLAY
[ 2 0 9] VMAA PORT
U U
NORMAL PORT
[ 2 0 5] VMAA PORT
U U
NORMAL PORT
[205] VMAA PORT
V M AA PORT
U U
Samsung Business Communications