Samsung OfficeServ 7000 Series Programming Manual page 404

CHAPTER 2. MMC Programming
06 ALTER
PROXY
07 PROXY PORT
08 PROXY NAME
09 DNS
SERVER1
10 DNS
SERVER2
11 USER NAME
12 AUTH USER
13 AUTH PSWD
14 REG PER
USER
15 SESSION
TIMER
16 SESSION EXP
17 TRK REG EXP
18 ALIVE NOTI
19 NOTIFY TIME
20 EXCLUSIVE
2-362
DNS query is executed, and through this, the IP address
of the SIP Server is acquired.
Designates the Alternate Proxy IP Address which is used
if the the primary SIP server fails.
Sets the port to use on the SIP Server.
Domain name which is set for the user authentication
when using the SIP server
Designates the IP address of any external name server
(DNS server). The DNS server resolves the SIP server
name to an IP address
OfficeServ7200 does not support DNS Query Feature.
Designate the alternative name server which is used
when the name server designated in the DNS server1
fails.
OfficeServ7200 does not support DNS Query Feature.
Alphanumeric System username when registering as a
trunking gateway. When empty, system does not send
REGISTER message to interacting Outbound SIP Server.
This is the username which is used if the authentication
is required from the SIP server. This is the item which is
used for registering the representative number.
This is the password which is used if the authentication is
required from the SIP server. This is the item which is
used for registering the representative number.
When interacting with the SIP Server, if this is enabled,
registration is made on a per user bases. Otherwise, sys-
tem will perform representative registration.
This is the timer value which is used when exchanging
the message periodically to maintain the session if one
session is set. Whether to use the session timer is de-
termined according to each SIP server. Using the default
value is recommended.
Indicates the Expire Time in Session Timer. In general,
the value given by the SIP server is used. Using the de-
fault value is recommended.
The Expire Time exists in periodical registeration to the
SIP server. In general, the value given by the SIP server
is used. Using the default value is recommended.
Some SIP Servers require SIP UA to send OPTIONS
method simply for link test purpose. When set, system
sends OPTIONS message to the SIP Server.
When ALIVE NOTI is set, NOTIFY TIME decides the
message sending time interval.
When Set to Enable, system will only respond specifically
to the enabled SIP server. It will ignore all other SIP
0.0.0.0
5060
NONE
0.0.0.0
0.0.0.0
4100
NONE
NONE
DISABLE
NONE
1800 sec
1800 sec
NONE
1800 sec
Disable
Samsung Business Communications