Samsung OfficeServ 7000 Series Programming Manual page 161

C ONDITIONS
5 3 5 B
An E1 card must be installed in the system, otherwise the message 'NO E1 TRUNK
CARD' is displayed.
D EFAULT DATA
5 3 6 B
NONE
A CTION
5 3 7 B
1) Press Transfer button and enter 411.
Display shows:
2) Enter desired trunk number.(e.g., 705)
OR
Press Volume button to make selection.
Press Right Soft button to move cursor.
OR
Select all trunks.
3) Press Volume button to select trunk type and
press Right Soft button to move cursor.
4) Press Volume button to signalling select and
press Right Soft button to move cursor.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
5 3 8 B
T RUNK PROGRAMMING
1 0 6 7 B
MMC 400
MMC 401
MMC 402
MMC 403
MMC 404
MMC 405
Samsung Business Communications
CUSTOMER ON/OFF PER TRUNK
TRUNK LINE/PBX LINE
TRUNK DIAL TYPE
TRUNK TOLL CLASS
TRUNK NAME
TRUNK CO TEL NUMBER
CHAPTER 2. MMC Programming
DISPLAY
[ 7 0 1] E1 SIGNAL
U U
UNUSE
[705] E1 SIGNAL
U N USE
U U
[ALL] E1 SIGNAL
?
[705] E1 SIGNAL
E & M:IMMEDIATE
U U
[705] E1 SIGNAL
E&M: I T U_WINK
U U
2-119