Samsung OfficeServ 7000 Series Programming Manual page 205

Timer Name
TRANSFER RECALL
TRK AUTOMOH DISC
TSW CONN. DELAY
UCDS AUDIO ALARM
UCDS VISUAL ALARM
VOIP RE-ROUTE TM
When timers value is '0'
Some timers are disabled when their value is set to '0'.
D EFAULT DATA
6 1 6 B
SEE DESCRIPTION
SOME TIMERS DEPEND ON COUNTRY
Samsung Business Communications
Default Range Unit
20 0-250 SEC
60 1-250 SEC
0 0-10 SEC
0 0-990 SEC
0 0-250 SEC
15 0-25 SEC
CHAPTER 2. MMC Programming
Description
This timer determines how long transferred
calls ring before recalling. This is a system-
wide timer.
When set to ON, incoming trunk calls are
connected to MOH automatically after the
DISA ANSWR timer(MMC 503) expires. In
this case the caller hears MOH. If the TRK
AUTOMOH DISC timer expires before the
call is answered, the call is disconnected.
When an incoming trunk makes an outgoing
call to another trunk, the system connects the
voice path after this time.
When an SVMi-20 card is installed and the digital
UCD package enabled, this counter determines
the maximum number of seconds a call has
been waiting at the UCD group before the UCD
group's SUPV key begins to flash along with an
audio alarm. For more UCD alarm conditions,
see MMC 500.
When an SVMi-20 card is installed and the
digital UCD package enabled, this counter
determines the maximum number of seconds
a call at the UCD group before the UCD
group's SUPV key begins to flash as an
alarm. For more UCD alarm conditions, see
MMC 500.
If an outgoing call made via a VoIP trunk
does not receive an acknowledgement
message from the called party within this
time, the call is treated as failed.
(continued)
2-163