Samsung OfficeServ 7000 Series Programming Manual page 403

SIP Extension Configuration
No Parameter
00 SIGNAL PORT
01 IP-UMS PORT
02 INCOM MODE
03 EXPIRE TIME
SIP Carrier Configuration
No Parameter
00 DEFAULT ISP
01 iBG EXPIRE
02 LCR SETUP
03 CLIR FLAG
SIP Trunk Configuration
No Parameter
00 SIP CARRIER
01 SIP SERVER
02 REGISTERED
03 REGIST
ADDR
04 REGIST PORT
05 OUT PROXY
Samsung Business Communications
Description
Sets the UDP port used for a SIP station call.
Sets the UDP port used for IP-UMS calls.
This option selects how incoming calls are routed when
the MGI is used as a SIP gateway.
0 FOLLOW DID TRANS: Follows MMC 714(default)
1 FOLLOW INCOM DGT: Follows MMC 724
2 FOLLOW TRUNK RING: Follows MMC 406
This indicates how long each registration from SIP sta-
tions will be valid. SIP stations will send the next REGIS-
TER message when half of this time value is reached.
Description
This field indicates the default SIP Carrier that will be
used for SIP trunking
When interacting with iBG, iBG sends REGISTER mes-
sage to system for link test purpose. The iBG EXPIRE
value indicates the expire time for the iBG's registration.
When making SIP Trunk outbound call, there exists time
interval till the outbound INVITE message is actually sent
out unless attaching '#' key in order to let system know
that dialing is done. When LCR SETUP value is set to
Enable, the system sends the outboud INVITE message
immediately
Description
Alphanumeric Name of SIP Carrier
Sets ENABLE or DISABLE to interact with external SIP
Server.
Displays the OfficeServ's registration status with the ex-
ternal SIP server/ SIP carrier.
Designate the Domain Name or the IP Address of the SIP
Registrar. If the domain name value is entered here, the
DNS query is executed, and through this, the IP address
of the Registrar server is acquired.
Sets the port to use on the Registrar Server.
Designates the Domain Name or the IP Address of the
SIP Server. If the domain name value is entered here, the
CHAPTER 2. MMC Programming
Default
5060
5070
FOLLOW DID
600
Default
1
10
Disable
Default
DISABLE
NO
NONE
5060
NONE
2-361