Samsung OfficeServ 7000 Series Programming Manual page 174

CHAPTER 2. MMC Programming
No Option
5 NB PLAN
UNKNOWN
ISDN
DATA
TELEX
NATIONAL
PRIVATE
EXTEN
6 CLIR w NUMB
7 NO CH BUSY
8 CD PLAN
9 CD TYPE
10 TIME SYNC
O PTIONS FOR BRI PORTS PROGRAMMED AS STATIONS
1 0 6 9 B
No Option
0 ANY CHANNEL
1 POWER FEED
2-132
Used to select the type of the Calling Party Number Plan to send to the
network.
Unknown numbering plan
ISDN numbering plan(CCITT E.163-164)
Data numbering plan(CCITT X.121)
Telex numbering plan(CCITT F.69)
National standard numbering plan
Private numbering plan
Local numbering plan
In case of CLIR, the flag can be set to OFF and the CLI number can be
sent.
If bri line is not available, this line can be set to be busy.
Specifies the called party's numbering plan as follows:
(This Option is not shown in OfficeServ 7100/ OfficeServ 7030.)
0. UNKNOWN
1. ISDN
2. NATION
Specifies the calling party's number type as follows:
(This Option is not shown in OfficeServ 7100/ OfficeServ 7030.)
0. UNKNOWN
1. INT. NAT
2. NATIONAL
3. NETWORK
4. SUBSCRIB
5. ABBREV
6. EXTEN
The time information of system can be updated automatically by BRI
incoming call.
When this option is set to YES, the system will place calls on any free
channel of that BRI if the channel chosen by the user is busy.(e.g.,
Preferred channel selection) If set to NO, the user will receive a busy
signal if they attempt to access a busy channel even if the other channel
on that BRI is free.(e.g., Exclusive channel selection)
This field determines if power to a BRI access will be supplied.(YES or
NO)
Description
Description
Samsung Business Communications
(continued)