Samsung OfficeServ 7000 Series Programming Manual page 99

No Option
39 SGR ALL OUT
40 CHAIN FWD
41 TRK MONITER
42 VOIP MFRALOC
43 NTWK
AUTOTMR
44 USE EURO
45 NO STAFF
COD
46 PERI UCD SIO
47 AUTO
CLEANED
48 REDIAL REVW
50 ISDN KEYFAC
52 CHK SPV TRK
53 PRE FWD
BUSY
54 ORG DIAL LOG
55 TIE TRSF RCL
Samsung Business Communications
Default
OFF When ON, the last remaining station group member can leave
a group.
ON If ON, an incoming call forwarded from a station to another
station may then be forwarded to the mailbox of the second
station, if the latter is set for 'forward to voice mail'. If this op-
tion is OFF, the call may only be forwarded to the mailbox of
the first station.
OFF If ON, the system will monitor the trunk supervision signalling.
That is, if a disconnection signal is received from the ex-
change, the call will be cleared and the extension will go back
on hook.
OFF If ON, this allocates a DTMF receiver for a VOIP tandem caller
breaking out on another trunk group.
OFF If OFF, the call timer in the phone display will not function if the
call is from a network connection(Q-SIG).
OFF If ON, the unit of currency shown in call displays and on
SMDR reports will be Euros(€).(This will also display on Hotel
Application invoices.)
OFF When ON, the steps verifying the staff code will be omitted in
Hotel operation.
OFF When ON, the PERI UCD data will be sent to the SMDR IO port.
OFF Normally, when a room is checked-out, the room status is
changed to NEED CLEAN. When the option is set to ON, the
room status will be changed to AVAILABLE instead.(Hotel Ap-
plication.)
OFF When ON, the CALL LOG review will appear when the Redial
or LNR button is pressed.
OFF If ON, allows Keypad Facility messages to be sent to the ex-
change to invoke network features.
OFF When ON, if trunks don't have the supervision feature they
cannot make outgoing transfers or unsupervised conferences.
OFF When ON, and a call arrives at a busy station that is not set for
forward busy, if a preset no answer destination is available the
call is re-routed to that destination.
OFF When ON, all dialled digits will be saved in the outgoing call
log for Large LCD phones. When OFF, invalid dialling such as
dialling of a non-existent station number will not be saved in
the outgoing call log for Large LCD phones.
ON When ON, and a trunk call transferred to the tie line is not an-
swered within the transfer recall time, the call is recalled to the
original transferring station. (This MMC is not shown in Office-
Serv 7100 / OfficeServ 7300
CHAPTER 2. MMC Programming
Description
).
(continued)
2-57