401] Trunk Line/Pbx Line - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 401] TRUNK LINE/PBX LINE

9 8 B
Used to select the mode of the trunk lines: CO LINE or PBX LINE. If PBX mode is chosen,
this allows PBX access codes to be recognized, thus allowing more complete toll restriction.
(call barring) This mode is assigned on a per-trunk basis.
D EFAULT DATA
5 0 1 B
ALL TRUNKS: CO LINE
A CTION
5 0 2 B
1) Press Transfer button and enter 401.
Display shows:
2) Dial trunk number.(e.g., 704)
OR
Use Volume button to scroll through trunk
numbers and press Right Soft button to move.
OR
Select all trunks.
3) Dial 1 for PBX or 0 for CO.(e.g., 1)
OR
Use Volume button to scroll through options
Press Right Soft button to return to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
5 0 3 B
NONE
2-106
DISPLAY
[ 7 0 1] PBX LINE
U U
CO LINE
[ 7 0 4] PBX LINE
U U
CO LINE
[ A L L] PBX LINE
U U
?
[704] PBX LINE
P B X LINE
U U
Samsung Business Communications