810] Halt Processing - Samsung OfficeServ 7000 Series Programming Manual

[ 810] HALT PROCESSING

2 1 4 B
Used only in the event that all data processing needs to be stopped either in a single cabinet
slot or in the entire system.
D EFAULT DATA
9 0 1 B
PROC
A CTION
9 0 2 B
1) Press Transfer button and enter 810.
Display shows:
2) Enter cabinet selection via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to advance cursor.
OR
Select all cabinets and slots.(and go to step 4)
3) Enter slot number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to advance cursor.
4) Enter 1 for HALT or 0 for PROC.
OR
Press Volume button to make selection and press
Right Soft button to enter and return to step 2.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
9 0 3 B
NONE
Samsung Business Communications
CHAPTER 2. MMC Programming
DISPLAY
HALT/PROCESSING
C:ALL S:ALL PROC
HALT/PROCESSING
C:1 S:ALL PROC
HALT/PROCESSING
C:ALL S:ALL PROC
HALT/PROCESSING
C:1 S:2 PROC
2-311