Samsung OfficeServ 7000 Series Programming Manual page 440

CHAPTER 2. MMC Programming
No Code
09 MJA09
10 MJA10
11 MJA11
12 MJA12
13 MJA13
- MJB--
14 MJB01
15 MJB02
19 MJB06
20 MJB07
MJC--
23 MJC01
24 MJC02
25 MJC03
28 MJC06
29 MJC07
30 MJC08
31 MJC09
38 MJC16
39 MJC17
- MJD--
40 MJD01
2-398
Alarm Name
FAN Recovery A FAN which did not work starts to operate correctly be-
fore system stops.
CPU Overload CPU Overload
CPU Overload CPU Overload Rec
Rec
FLASH FORMAT FLASH FORMAT Err
Err
Invalid MMC Halt An Invalid MMC card has inserted in SYSTEM. So sys-
tem is halted.
LCP/TASK Error LCP or TASK Fault
HDLC Com Error Communications to LCP lost or faulty.
Memory Alarm 1 A RAM diagnostic check error has occurred in the
MCP2.
IPC MSGQ Over IPC TX queue full error has occurred in the MCP2.
Alarm data = IPC Queue type
(MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2)
IPC MSGQ Under IPC TX queue full recovery has occurred in the MCP2.
Alarm data = IPC Queue type
(MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2)
DSP Error System DSP Fault
DTMF Fault An abnormal interrupt has occurred in the system
DTMF resources.
Alarm data = DTMF Receiver DSP position
Tone Fault An abnormal interrupt has occurred in the system
tone resources.
Alarm data = TONE Receiver DSP position.
CID DSP Fault CID DSP Fault
AC Pwr Loss AC Pwr Loss
AC Pwr Recov- AC Pwr Recovery
ery
Low Battery Low Battery
Low Battery Rec Low Battery Rec
WLI Restart The WLI card has restarted.
Alarm data = Cabinet, Slot(Cx-Syy)
WLI Block The WLI card has blocked because the system
detects the card does not work correctly.
Alarm data = Cabinet, Slot(Cx-Syy)
DTRK Error ISDN or E1 card Fault
Sync Failure Clocking on TEPRI cards has become asynchronous.
(continued)
Definition
Samsung Business Communications