828] Rcm2 Dsp Mode Select - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 828] RCM2 DSP MODE SELECT

2 3 0 B
RCM2 D-Board is operated one mode of R2/CID, R2 only, CID only, B'd TYPE
This MMC can assign RCM2 DSP mode.
C ONDITION
9 5 1 B
RCM2 board must be equiped in LCP.
MMC [827]
This MMC is only shown in OfficeServ 7200. OfficeServ 7200 only supports
RCM2 D-Board.
D EFAULT DATA
9 5 2 B
R2/CID
A CTION
9 5 3 B
1) Press Transfer button and enter 828.
Display shows:
2) Dial the cabinet number.(1-2)
OR
Press Volume button to select and press
Right Soft button to move cursor.
3) Dial the LOC number.(1-3)
OR
Press Volume button to select and press
Right Soft button to move cursor.
4) Dial digit to select RCM2 mode.(0-2)
OR
Press Volume button to select and press
Right Soft button to move cursor.
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
9 5 4 B
NONE
2-336
DISPLAY
R2MFC/CID SELECT
C 1 - B1 :R2/CID
U U
R2MFC/CID SELECT
C2-B 1 :R2/CID
U U
R2MFC/CID SELECT
C2-B1 : R 2 /CID
U U
R2MFC/CID SELECT
C2-B1 : R 2 ONLY
U U
Samsung Business Communications