Samsung OfficeServ 7000 Series Programming Manual page 305

Option
EXTENSION
FOR DN2
TRUNK FOR DN2
SEPARATOR
DISCONNECT
SIGNAL
CALL TYPE ID
Samsung Business Communications
If set to yes, when the voice mail auto attendant system answers
a call the system will send data in the DN2 field indicating the
originating station of the call ringing the VMAA port.
If set to no, when the voice mail auto attendant system answers
a call the system will not send station data in the DN2 field.
If set to yes, when the voice mail auto attendant system answers
a call the system will send data in the DN2 field indicating the
originating trunk of the call ringing the VMAA port.
If set to no, when the voice mail auto attendant system answers
a call the system will not send trunk data in the DN2 field.
When both DN1 and DN2 are used, a digit defined here is sent
between DN1 and DN2 so the VMAA system can determine
where DN 1 stops and where DN 2 starts. The separator can be
DTMF 0 through 9, *, #, A, B or C.
This is the call progress digit sent to the VMAA port in place of a
disconnect open. The digit defined here is sent three times.
This is the DTMF digit that is sent first in the in band digit string
and can identify any of the following call types.
No Call Type
0 DIRECT A call originating directly from another
CALL station in the system.
1 ALL FWD This indicates that a call was forwarded to
CALL the VM/AA port from a station with CALL
FORWARD ALL set.
2 BSY FWD This indicates that a call was forwarded to
CALL the VM/AA port from a station with CALL
FORWARD BUSY set.
3 NOA FWD This indicates that a call was forwarded to
CALL the VM/AA port from a station with CALL
FORWARD NO ANSWER set.
4 RECALL A call is recalling the VM/AA port after
being transferred and not answered.
5 DIR TRK A Trunk Line call has gone directly to
CALL VM/AA.(e.g., trunk 717 DIL to VM/AA)
6 OVERFLOW A call has OVERFLOWED to the VM/AA
port from a station group.
7 DID CALL A DID call has called the VM/AA port.
8 MESSAGE A message button or message reply
CALL feature code has been used to call the
VM/AA port.
CHAPTER 2. MMC Programming
Description
Description
(continued)
Default
No
No
No
C
Default
1
2
3
4
4
6
4
8
9
2-263