Samsung OfficeServ 7000 Series Programming Manual page 100

Hide thumbs Also See for OfficeServ 7000 Series:
Table of Contents

Advertisement

CHAPTER 2. MMC Programming
No
Option
56
VOIP REALRBT
57
CO-CO TM ALL
58
SMDR LOG ALL
59
NO ITEM COST
60
SMDR
AUT2ACC
64
IPNW REAL RB
66
TRK AUTO MOH
67
TRSF VT KEY
68
PAIR NO RING
69
DISA NO ACT
70
ICM AUTOHOLD
71
DTMF TO S0
72
STNHOLD PICK
73
AREA DELETE
74
ELCR DIALTON
75
NET DTMF FWD
76
3.1K W/O HLC
77
AOC CALLCOST
2-58
Default
OFF
When ON, the system will connect the real path of the outgo-
ing trunk to the incoming VoIP trunk user instead of providing
virtual ringback tone.
OFF
When ON, the system trunk call will be attached timer for
preven the call from locking up
OFF
If the hotel feature is in admin/normal station mode and cost
is '0', this option allows 'smdr record save'.
OFF
If the hotel feature is in check-in mode, this option allows
skipping item code and cost input.
OFF
When ON, the AUTHORIZATION CODE will be printed in
ACCOUNT field of SMDR.
OFF
When ON, the system will connect the real path of the outgo-
ing trunk to the VoIP networking trunk user instead of provid-
ing virtual ringback tone.
OFF
When ON, an incoming trunk call is connected to MOH
automatically after the DISA ANSWR timer(MMC 503) ex-
pires and the caller hears MOH. If the TRK AUTOMOH DISC
timer in MMC501 expires before the call is answered, it is
disconnected.(To use this feature, MMC 400 AUTO AN-
SWER option must set to ON.)
ON
When ON, works like the VT key when the user transfers the
call to Voice Mail using the TRSF key.
OFF
When ON, if a paired phone is busy the call camps on and a
message waiting indication is set at the busy phone and
does not ring the free paired extension.
OFF
When ON, a DISA call will go to the station assigned in MMC
406 after the DISA NO ACT timer expires.
OFF
When ON, will allow internal calls to be put on hold auto-
matically when another call is taken.
OFF
When ON, this option allows sending DRMF to S0 extension.
OFF
When ON, this option allows a different extension to pick up
intercom hold.
OFF
In a Phonebook outgoing call, this option allows deleting the
area code and making the outgoing call.
OFF
In Second lcr operation, this option allows generating a dif-
ferent dial tone.
OFF
When ON, ext fwd is specified in SPnet when only the sta-
tion port is captured and the dial tone is heard.
OFF
When ON, an incoming call is dialed when the type of ISDN
incoming call is 3.1K AUDIO type without HLC.
OFF
Hotel ENABLE
Description
option
ON
Samsung Business Communications
(continued)

Advertisement

Table of Contents
loading

Table of Contents