304] Assign Extension/Trunk Use - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 304] ASSIGN EXTENSION/TRUNK USE

8 0 B
Allows you to select which stations are allowed to make calls through C.O. lines or
to answer calls for C.O. lines.(on a station and trunk use group basis)
C ONDITIONS
4 4 1 B
Stations are set within use group numbers 001~300 (001~100 in OfficeServ 7100)
(001~020 in OfficeServ 7030) and trunks are set within use group numbers 301~500
(101~200 in OfficeServ 7100) (021~040 in OfficeServ 7030) in MMC 614, ASSIGN
USE GROUP.
If a station group is set to NO Dial, stations cannot place calls on that trunk group.
If a station group is set to NO Answer, stations cannot answer incoming calls on that
trunk group.
Note: MMC 406, Trunk Ring Assignment, overrides this MMC for the Answer option.
D EFAULT DATA
4 4 2 B
DIAL: YES
ANS: YES
A CTION
4 4 3 B
1) Press Transfer button and enter 304.
Display shows:
2) Dial the station use group number.(e.g., 005)
OR
Press Volume button to select station use group
and press Right Soft button.
OR
Select all station use groups.
3) Dial the station use group number.(e.g., 304)
OR
Press Volume button to select trunk use group
and press Right Soft button.
OR
Select all trunk use groups.
2-80
DISPLAY
( 0 0 1) USE (301)
U U
DIAL:YES ANS:YES
(005) USE ( 3 0 1)
U U
DIAL:YES ANS:YES
(ALL) USE ( 3 0 1)
U U
DIAL:YES ANS:YES
(005) USE (304)
DIAL: Y E S ANS:YES
U U
(005) USE (ALL)
DIAL: Y E S ANS:YES
U U
Samsung Business Communications