800] Enable Technician Program - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 800] ENABLE TECHNICIAN PROGRAM

2 0 6 B
Used to open and close technician-level programming. If programming is not opened and
an attempt is made to access a system MMC, an error message will be displayed.
C ONDITIONS
8 7 4 B
A 4-digit passcode is required to access this MMC. Each character can be digits 0-9. When
opened, this MMC enables access to all MMCs.
D EFAULT DATA
8 7 5 B
DISABLE
A CTION
8 7 6 B
1) Press Transfer button and enter 800.
Display shows:
2) Enter passcode.
Correct code shows:
Incorrect code shows:
3) Enter 1 to enable or 0 to disable.
OR
Press Volume button to select and press
Right Soft button to move tenant number and
enter tenant number(1-2).
4) Press Speaker button to advance to MMC entry level.
5) Enter the MMC required to begin programming.
6) To log out and return to MMC 800, press
Volume button to select DISABLE.
OR
Press Speaker button then Transfer to return to
normal display.
Programming option will time out.
R ELATED ITEMS
8 7 7 B
MMC 801
2-296
CHANGE TECHNICIAN PASSCODE
DISPLAY
ENABLE TECH.PROG
PASSCODE:
ENABLE TECH.PROG
PASSCODE:∗∗∗∗
ENABLE TECH.PROG
DISABLE TENANT:1
ENABLE TECH. PROG
PASSCODE ERROR
ENABLE TECH.PROG
ENABLE TENANT:1
801:TEC.PASSCODE
SELECT PROG.ID
Samsung Business Communications