Samsung OfficeServ 7000 Series Programming Manual page 362

CHAPTER 2. MMC Programming
LP4Vxxxx.PGM/L
PPVxxxx.PGM
PR2xxxxx.PGM
PRIxxxxx.PGM
DATABASE.ENT/
DATABASE.SME
D EFAULT DATA
9 2 2 B
NONE
A CTION
9 2 3 B
1) Press Transfer button and enter 819.
Display shows:
2) Press Volume button to select program type and
press Hold button to move cursor delete Selection.
3) Dial 1 for YES or 0 for NO.
OR
Press Volume button to make selection and press
Right Soft button to delete file and move cursor
step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
9 2 4 B
NONE
2-320
LP40/LCP program. The LP40/LCP program is installed on the card itself.
The one included in Media Card is used for software version upgrade.
TEPRI2 program. The TEPRI2 program is installed on the card itself. The one
included in Media Card is used for software version upgrade
TEPRI program. The TEPRI program is installed on the card itself. The one
included in Media Card is used for software version upgrade.
This file is created in Media Card when SYSDB is saved to SMDB by MMC
815. Initially not included, this file is created only when SMDB is created by
MMC 815.
DISPLAY
S T ARTUP.INI
U U
sz:512 bytes
M P E08301.PGM
U U
sz:14418432 bytes
MPE08301.PGM
DELETE FILE? N O
U U
Samsung Business Communications