Hitachi Compute Blade 2000 User Manual page 99

Requirements for server display settings

Remote console application (Java application) supports the following resolutions and
number of color bits.
Server OS
Windows
Linux
(*) For Windows Server 2012 and Windows Server 2012 R2, you can set only 32
bits as color bits due to the OS specifications. Set 1024 x 768 for resolution and 32
bits for color bits
Combinations other than those above are not supported. Using other combinations
may cause the screen to show nothing or to be distorted.
See Chapter 12; Logical partitioning manager for requirements about the logical
partitioning manager.
Connection from Multiple Management PCs

Multiple console terminals cannot log in to a single server blade at the same time.
Number of sessions

Up to 130 MB memory is used by the remote console application. If you perform too
many remote console application sessions from a single console terminal while
multiple console terminals are running, they may operate improperly due to the lack of
memory.
Numeric Keypad

The numeric keypad on a keyboard connected to a console terminal depends on the
state of the keyboard connected to the server blade regardless of the state of
NumLock of the console terminal.
Disabling CD/DVD AutoRun of Management PC

Disable Windows CD/DVD AutoRun on the console terminal when using the remote
CD/DVD.
Remote Power Operation with logical partitioning manager (LP) mode

Power operation by the remote console targets the server blade, which affects all
logical partitions (LPARs) managed by the LPAR manager. Then, with a server blade
in LP mode, power performance by remote console is disabled, which does not allow
the following operation.
Power ON, Force power OFF, Reset, and NMI
Resolutions
640 x 480 (VGA mode)
800 x 600
1024 x 768 (recommended)
1280 x 1024
640 x 480
800 x 600
1024 x 768 (recommended)
1280 x 1024
48
Color bits
8 bits
16 bits
32 bits
16 bits (recommended)
32 bits
16 bits(*)
16 bits
16 bits
32 bits
16 bits (recommended)
32 bits
16 bits